I tried with 2 program procedure a couple times without success, so I did the 1 key stand alone remote start procedure. All of the LED indicators worked correctly and the Dcryptor procedure was successful. I installed the unit back into the car and I am getting a sequence of light flashing both with the module and running lights. I double and triple checked to make sure all connections were solid and correct. No external RF is being used, so most of the those connections are left unconnected.
4A-4B empty pin to ground is connected (hood pin wire was left unattached, but was tried both connected to a ground and unconnected with no success)
Door lock and Data key connections correct and solid
D connector with parking lights correct
The main reason I did not do the 2 key program procedure was becuase the securty light was not illuminated after pressing the start button twice for the first key programming.
I have videos of the remote start process and the lights blinking for both the outside of the car and the module inside the car. I will attach a link for youtube videos.
Module video
https://youtube.com/shorts/5ySAvsqS_qs?feature=share
outside vehicle video
https://youtube.com/shorts/-u8GTiVlDW0?feature=share
Thanks a bunch
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
